NSN 5305-01-014-2584
High Torque Screw
Between 0.690 inches and 0.720 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number S5008-3-5 for national stock number 5305010142584.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-2584.
-
MPN or Model
S5008-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.690 inches and 0.720 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.289 inches and 0.309 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-826-9971 MPN FH399-0256-5PMachine Screw
- 5305-01-004-9528 MPN HT4027-3-3Close Tolerance Screw
- 5305-01-050-9677 MPN HT4009-4-11Shoulder Screw
- 5305-01-173-3587 MPN HT4020-4-5AClose Tolerance Screw
- 5305-01-268-5962 MPN HT4020-4-13XShoulder Screw
- 5305-01-280-6737 MPN HT4057-3-24AClose Tolerance Screw
- 5305-01-328-9227 MPN 03A225-3-5Close Tolerance Screw
- 5305-01-329-9738 MPN SC5027-4-13AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-2584 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-3-5 | Northrop Grumman Systems Corporation |
S5008-3-5 | Huck International, Inc. |
S5008-3-5 | Alcoa Global Fasteners, Inc. |
S5008-3-5 | Arconic Global Fasteners & Rings, |
S5008-3-5 | Sps Technologies, Llc |
S5008-3-5 | Hi-shear Corporation |
S5008-3-5 | Lisi Aerospace Canada Corp |
S5008-3-5 | Huck Intl Inc |
Stock Check
- NS: 8
- NE: 3574