NSN 5305-01-014-2586
High Torque Screw
Between 1.315 inches and 1.345 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number S5008-3-15 for national stock number 5305010142586.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-2586.
-
MPN or Model
S5008-3-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.315 inches and 1.345 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.914 inches and 0.934 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-545-4841 MPN HBL520R9WElectrical Receptacle Connector
- 1680-01-242-9655 MPN 200778-6Port End Extension
- 5305-00-054-4973 MPN 51B234-3Socket Head Cap Screw
- 5305-00-058-0795 MPN NAS1102-06-7Machine Screw
- 5305-00-310-5281 MPN E723-255Socket Head Cap Screw
- 5305-00-448-4631 MPN HS2623-4Z-17XClose Tolerance Screw
- 5305-00-902-1621 MPN NAS1190C3T8LSocket Head Cap Screw
- 5305-01-068-2306 MPN D16152Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-2586 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-3-15 | Huck International, Inc. |
S5008-3-15 | Northrop Grumman Systems Corporation |
S5008-3-15 | Alcoa Global Fasteners, Inc. |
S5008-3-15 | Huck Intl Inc |