NSN 5305-01-014-2590
High Torque Screw
Between 1.065 inches and 1.095 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number S5008-3-11 for national stock number 5305010142590.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-2590.
-
MPN or Model
S5008-3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.065 inches and 1.095 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.664 inches and 0.684 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2822 MPN LS15267V3-21Machine Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-01-016-9638 MPN 51B581-4-1Close Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-055-3811 MPN BACB30LU5-6Close Tolerance Screw
- 5305-01-143-1756 MPN HT4011-7-12Shoulder Screw
- 5305-01-158-5370 MPN SC2163-3-6Machine Screw
- 5305-01-284-7157 MPN C7985-5-23Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-2590 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-3-11 | Northrop Grumman Systems Corporation |
S5008-3-11 | Alcoa Global Fasteners, Inc. |
S5008-3-11 | Huck International, Inc. |
S5008-3-11 | Arconic Global Fasteners & Rings, |
S5008-3-11 | Sps Technologies, Llc |
S5008-3-11 | Hi-shear Corporation |
S5008-3-11 | Lisi Aerospace Canada Corp |
S5008-3-11 | Huck Intl Inc |