NSN 5305-01-014-5480
High Torque Screw
Between 1.626 inches and 1.656 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1156-20 for national stock number 5305010145480.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-5480.
-
MPN or Model
NAS1156-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.626 inches and 1.656 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
101.0 degrees -
Surface Finish
32.0 microinches -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1156 professional/industrial association standard
More from these suppliers
- 5940-01-362-7188 MPN NAS1063Terminal Board Marker Strip
- 5940-01-425-6040 MPN NAS1063Terminal Board Marker Strip
- 5305-00-019-9467 MPN NAS1351-3LN6Socket Head Cap Screw
- 5305-00-058-4008 MPN MS24694S116Machine Screw
- 5305-00-066-7325 MPN MS24693-C5Machine Screw
- 5305-00-108-9712 MPN NAS1218-6-4Machine Screw
- 5305-00-143-3229 MPN MS21295-71Socket Head Cap Screw
- 5305-00-144-8446 MPN NAS1146-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-5480 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |
NAS1156-20 | National Aerospace Standards |