NSN 5305-01-014-8310
Bolt Stove
Between 0.844 inches and 0.875 inches fastener length, flat countersunk head style, between 0.322 inches and 0.385 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102E3-14 for national stock number 5305010148310.
Datasheet
-
Product description
Machine Screw NSN 5305-01-014-8310.
-
MPN or Model
NAS1102E3-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.702 inches and 0.795 inches -
Fastener Length
Between 0.844 inches and 0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.322 inches and 0.385 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams 5737 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1102 professional/industrial association standard
More from these suppliers
- 5940-01-351-3864 MPN NAS1063A15-10SCTerminal Board
- 5305-00-038-2431 MPN NAS514P632-22Machine Screw
- 5305-00-052-5947 MPN MS35198-6Machine Screw
- 5305-00-057-0513 MPN MS51958-16Machine Screw
- 5305-00-058-4020 MPN MS24694S122Machine Screw
- 5305-00-059-3524 MPN MS35308-358Hexagon Head Cap Screw
- 5305-00-071-2094 MPN MS51958-84Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-014-8310 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102E3-14 | National Aerospace Standards |
10114837 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NS: 1120
- NE: 39458
- SV: 18