NSN 5305-01-015-6639
High Torque Screw
Between 0.902 inches and 0.949 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number C082-4-10 for national stock number 5305010156639.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-6639.
-
MPN or Model
C082-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 0.902 inches and 0.949 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-9753 MPN BACB30LK3U7Close Tolerance Screw
- 5305-00-364-9541 MPN HT4025L3-24Close Tolerance Screw
- 5305-00-510-5283 MPN LS15263V06-10Machine Screw
- 5305-01-054-4628 MPN BACB30LU2-2Close Tolerance Screw
- 5305-01-097-8213 MPN AIC1023H10-10Close Tolerance Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-211-0671 MPN AIC538-230Socket Head Cap Screw
- 5305-01-217-2923 MPN BACB30LU4-26XShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-015-6639 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C082-4-10 | Lockheed Martin Corporation |
AIC82-4-10 | Sps Technologies, Llc |
VS2545T4F10 | Alcoa Global Fasteners, Inc. |
SFT22-4A-10 | Sps Technologies, Llc |
C082-4-10 | Sps Technologies, Llc |
C082-4-10 | Arconic Global Fasteners & Rings, |
C082-4-10 | Sps Technologies, Llc |
C082-4-10 | Alcoa Global Fasteners, Inc. |
SFT22-4A-10 | Sps Technologies, Llc |