NSN 5305-01-015-6645
High Torque Screw
Between 0.751 inches and 0.781 inches fastener length, fillister countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, head height: 0.015 inches .
Manufacturer part number S5008-4-5 for national stock number 5305010156645.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-6645.
-
MPN or Model
S5008-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.751 inches and 0.781 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
End Application
Aircraft, thunderbolt ii, a-10 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.287 inches and 0.307 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-775-2424 MPN 51B221-37Machine Screw
- 5305-00-916-4621 MPN C387H10-23Machine Screw
- 5305-00-932-1831 MPN 51B581-3-4Machine Screw
- 5305-01-046-8030 MPN HT4010-5-10Shoulder Screw
- 5305-01-146-0523 MPN HT4049-5D13XShoulder Screw
- 5305-01-146-7291 MPN ST3M713-4-11-1Close Tolerance Screw
- 5305-01-184-3777 MPN BACB30LU8-21YShoulder Screw
- 5305-01-193-6809 MPN SC1785R-3-13Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-015-6645 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-4-5 | Northrop Grumman Systems Corporation |
S5008-4-5 | Hi-shear Corporation |
S5008-4-5 | Huck International, Inc. |
S5008-4-5 | Lisi Aerospace Canada Corp |
S5008-4-5 | Alcoa Global Fasteners, Inc. |
S5008-4-5 | Arconic Global Fasteners & Rings, |
S5008-4-5 | Sps Technologies, Llc |
S5008-4-5 | Huck Intl Inc |
Stock Check
![](/public/images/partscage_shelf3.png)