NSN 5305-01-015-6646
High Torque Screw
Between 0.579 inches and 0.609 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4025L3-3 for national stock number 5305010156646.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-6646.
-
MPN or Model
HT4025L3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.579 inches and 0.609 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-105-9372 MPN 3M926-3L13Close Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5306-00-783-4802 MPN 32-50159-13Close Tolerance Bolt
- 5305-01-351-0805 MPN VCL0008-3-15Close Tolerance Screw
- 5305-01-435-5841 MPN BACB30LU8-58Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5305-01-513-8891 MPN VCL0010-6-12Close Tolerance Screw
- 5306-00-804-0096 MPN 51B464-3-16Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-015-6646 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L3-3 | Sps Technologies, Llc |
CHT4025-3-3 | Arconic Global Fasteners & Rings, |
ST3M454-3L-3 | Boeing Company, The |
ST3M454-3L-3 | Valley-todeco, Inc. |
HT4025L3-3 | Sps Technologies, Llc |
ST3M454-3L-3 | Heartland Precision Fasteners, Inc. |
HT4025L3-3 | Huck International, Inc. |
ST3M454-3L-3 | Houston Precision Fasteners I, Lp |
HT4025L3-3 | Sps Technologies, Llc |
HT4025L3-3 | Sps Technologies, Llc |
11905-3L3 | Reid Products Inc. |
HT4025L3-3 | Hi-shear Corporation |
HT4025L3-3 | Lisi Aerospace Canada Corp |
ST3M454-3L-3 | Fastener Innovation Technology, Inc. |
HT4025L3-3 | Alcoa Global Fasteners, Inc. |
HT4025L3-3 | Arconic Global Fasteners & Rings, |
WC4025L-3-3 | West Coast Aerospace Inc |
HT4025L3-3 | Sps Technologies Ltd Tj Brooks |
HT4025L3-3 | Sps Technologies Inc |
HT4025L3-3 | Huck Intl Inc |
10114846 | Nimikkeistokeskus Ncb Finland |
CHT4025-3-3 | Deutsch Co The |
CHT4025-3-3 | Sps Technologies, Llc |
CHT4025-3-3 | Alcoa Global Fasteners, Inc. |
ST3M454-3L3 | Twist Tite Mfg, Inc |
Stock Check
- NS: 350
- NE: 591