NSN 5305-01-016-8097
High Torque Screw
Between 1.610 inches and 1.640 inches fastener length, between 0.577 inches and 0.635 inches head diameter, between 0.3110 inches and 0.3120 inches grip diameter, min. tensile strength (psi): 160000 pounds per square inch.
Manufacturer part number NAS1155-20 for national stock number 5305010168097.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-016-8097.
-
MPN or Model
NAS1155-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.610 inches and 1.640 inches -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Specification Data
80205-nas1155 professional/industrial association standard
More from these suppliers
- 5930-00-681-4897 MPN MS25224-2Switch Guard
- 5940-01-046-5338 MPN NAS1745-8Conductor Splice
- 5305-00-008-9120 MPN MS27039-1-37Machine Screw
- 5305-00-021-3806 MPN MS35307-413Hexagon Head Cap Screw
- 5305-00-052-1560 MPN AN525D8R10Socket Head Cap Screw
- 5305-00-069-5572 MPN MS90725-84Hexagon Head Cap Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-079-1748 MPN MS24694S19Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-016-8097 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155-20 | National Aerospace Standards |