NSN 5305-01-020-0871
High Torque Screw
Retaining element in @shank.
Manufacturer part number AS116-04-38 for national stock number 5305010200871.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-020-0871.
-
MPN or Model
AS116-04-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.328 inches -
Fastener Length
Between 2.793 inches and 2.813 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.375 inches and 2.390 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.698 inches first hole and 2.718 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-842-1513 MPN CC00035-4-15Close Tolerance Screw
- 5305-01-470-2853 MPN CA29040-3-3-9HSPanel Fastener Screw
- 5305-01-520-5496 MPN CA2292-10-25-19Machine Screw
- 5305-01-534-1704 MPN CA21394-4TXMachine Screw
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-151-2725 MPN MILS7839Machine Screw
- 5305-00-269-4207 MPN MS24694S149Machine Screw
- 5305-00-340-4729 MPN NAS1100E00-18Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-020-0871 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS116-04-38 | Avibank Mfg., Inc. |
MS21125-0438 | National Aerospace Standards |
MS21125-0438 | Military Standards |
CA2652-04-38 | Arconic Global Fasteners & Rings, |
AS116-04-38 | Avibank Mfg., Inc. |
CA2652-04-38 | Arconic Global Fasteners & Rings, |