NSN 5305-01-021-9157
High Torque Screw
Between 2.265 inches and 2.312 inches fastener length, flat countersunk head style, between 1.135 inches and 1.145 inches head diameter, grip diameter: between 0.5607 inches and 0.5616 inches .
Manufacturer part number NAS339CPA21 for national stock number 5305010219157.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-021-9157.
-
MPN or Model
NAS339CPA21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.890 inches and 0.937 inches -
Fastener Length
Between 2.265 inches and 2.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.135 inches and 1.145 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.562 inches -
Grip Length
1.374 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-006-0633 MPN NAS514P428-14PMachine Screw
- 5305-00-007-6176 MPN NAS1100C02-7Machine Screw
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-046-7439 MPN NAS1151E23Close Tolerance Screw
- 5305-00-147-3241 MPN MS51861-40CTapping Screw
- 5305-00-204-4850 MPN MS24629-73Tapping Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-021-9157 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS339CPA21 | National Aerospace Standards |