NSN 5305-01-022-5602
High Torque Screw
Between 0.926 inches and 0.956 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number LS15234V4-6 for national stock number 5305010225602.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-022-5602.
-
MPN or Model
LS15234V4-6
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.541 inches and 0.591 inches -
Fastener Length
Between 0.926 inches and 0.956 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-004-7844 MPN 846847-117Oxyge Tube Assembly
- 1560-00-015-2480 MPN 3C90004-129Chain And Cable Assembly
- 5930-00-018-4485 MPN 610124-1Push Switch
- 1560-00-027-1440 MPN 779439-3Refrigerato Fitting
- 1680-00-073-7323 MPN 3E12177-101Navigat Table Panel
- 1680-00-076-2522 MPN 669286-11Rotary Electro-mechanical Actuator
- 1680-00-079-3195 MPN 4C52984-101AQuadrant Rudder Support
- 4920-00-105-4378 MPN 4S90734-101AActuator Shi Tester
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-022-5602 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234V4-6 | Lockheed Martin Corporation |