NSN 5305-01-023-1924
Panel Screw
Chamfered head.
Manufacturer part number 123SAM50082-11 for national stock number 5305010231924.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-023-1924.
-
MPN or Model
123SAM50082-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096660 - Screws NOI Silver Plated -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.396 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.167 inches and 0.171 inches -
Head Height
0.150 inches -
First Diameter From Head
Between 0.076 inches and 0.080 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.146 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 303se -
Material Specification
Astm a582 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 1680-00-003-3801 MPN A51K56638-1Tube Clamp Assembly
- 1560-00-003-9102 MPN A51B92684-11Pin Latch Cover
- 4820-00-009-9006 MPN A51H10572Valve Seat
- 1560-00-009-9117 MPN 123CM12002-501Bell Crank
- 5935-00-032-9529 MPN GA800TBC22-12BElectrical Connector Backshell
- 5945-00-063-4416 MPN GR13FD1Electromagnetic Relay
- 5935-00-072-8525 MPN GC810R1Electrical Plug Connector
- 1560-00-148-8980 MPN A51B42011-13Aircraft Door Block
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-023-1924 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |
123SAM50082-11 | Northrop Grumman Systems Corporation |