NSN 5305-01-027-6402
High Torque Screw
Retaining balls in shank 180 degrees apart.
Manufacturer part number CA2654-4-53 for national stock number 5305010276402.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-027-6402.
-
MPN or Model
CA2654-4-53
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 3.731 inches and 3.751 inches -
Head Style
Pan -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 3.312 inches and 3.328 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-087-5062 MPN 160C415024-23Keeper Assembly
- 5305-00-938-2192 MPN CA3040-3HSShoulder Screw
- 5305-00-432-4250 MPN AS105-04-0430Machine Screw
- 5306-00-182-7312 MPN AS 207Shoulder Bolt
- 5306-01-163-9568 MPN AS230Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-027-6402 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-4-53 | Arconic Global Fasteners & Rings, |
AS126-4-53 | Avibank Mfg., Inc. |