NSN 5305-01-028-0184
High Torque Screw
Between 1.386 inches and 1.416 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1203-18D for national stock number 5305010280184.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-028-0184.
-
MPN or Model
NAS1203-18D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.386 inches and 1.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.259 inches first hole and 1.309 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1203 professional/industrial association standard
More from these suppliers
- 5305-00-638-5462 MPN S1029421-6-8Machine Screw
- 5305-00-903-1502 MPN NAS1221-06-3Machine Screw
- 5305-01-028-5695 MPN NAS1123E4HClose Tolerance Screw
- 5305-00-841-1956 MPN NAS1151-1Close Tolerance Screw
- 5305-00-869-1155 MPN NAS1204-50Close Tolerance Screw
- 5305-00-988-9229 MPN NAS1123-3Close Tolerance Screw
- 5305-01-064-3587 MPN NAS1190-08P20BSocket Head Cap Screw
- 5320-00-173-8797 MPN NAS1199-5-5Solid Rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-028-0184 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-18D | Eriks Southwest Inc |
NAS1203-18D | Apcom Inc |
NAS1203-18D | Nor-cal Supply Co.inc. |
NAS1203-18D | National Aerospace Standards |
NAS1203-18D | Hi-shear Corporation |
NAS1203-18D | Sps Technologies, Llc |
NAS1203-18D | Lisi Aerospace Canada Corp |
NAS1203-18D | Sps Technologies, Llc |
NAS1203-18D | Lawrence Engineering And Supply Inc |
NAS1203-18D | F And C Sales Inc |
NAS1203-18D | Collins Engineering Corp |
NAS1203-18D | Durham Aircraft Service Inc |
NAS1203-18D | Air Industries Co Inc |