NSN 5305-01-029-7705
High Torque Screw
Between 1.578 inches and 1.625 inches fastener length, flat countersunk head style, between 1.007 inches and 1.014 inches head diameter, grip diameter: between 0.4990 inches and 0.4995 inches .
Manufacturer part number HT123-8-13 for national stock number 5305010297705.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-029-7705.
-
MPN or Model
HT123-8-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.756 inches and 0.823 inches -
Fastener Length
Between 1.578 inches and 1.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.014 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 44.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8617 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-307-1473 MPN HT404A5-25Shoulder Screw
- 5305-00-350-6291 MPN 3016986Close Tolerance Screw
- 5305-01-054-6257 MPN C7985-3-10Close Tolerance Screw
- 5305-01-056-1513 MPN BACB30LU4-35Close Tolerance Screw
- 5305-01-141-7198 MPN HT4020-5-16AYShoulder Screw
- 5305-01-183-5869 MPN GB510CG-4-20Close Tolerance Screw
- 5305-01-236-9157 MPN VS3292-1Socket Head Cap Screw
- 5305-01-254-2786 MPN SC2819-008Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-029-7705 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT123-8-13 | Huck International, Inc. |
HT1029A-8-13 | Arconic Global Fasteners & Rings, |
HT8N-13 | Hi-shear Corporation |
54291-8-13 | Sps Technologies, Llc |
HT8N-13 | Lisi Aerospace Canada Corp |
HT1029A-8-13 | Alcoa Global Fasteners, Inc. |
3M123-8-13 | Alcoa Global Fasteners, Inc. |
3M123-8-13 | Boeing Company, The |
HT123-8-13 | Huck Intl Inc |
Stock Check
- NS: 53
- NE: 37