NSN 5305-01-030-2653
High Torque Screw
Between 0.672 inches and 0.702 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-6-5 for national stock number 5305010302653.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-030-2653.
-
MPN or Model
HT4041-3-6-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.672 inches and 0.702 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-046-3341 MPN ST3M495-5-5Shoulder Screw
- 5305-01-349-0815 MPN VCL009-5-13Close Tolerance Screw
- 5305-01-350-4207 MPN VCL0009-3D4Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-435-8284 MPN BACB30LU9-40Close Tolerance Screw
- 5305-01-465-2407 MPN 3M1170V4-12AClose Tolerance Screw
- 5305-01-579-9838 MPN ST3M557-9-16Close Tolerance Screw
- 5306-00-926-5554 MPN 3M33-7-15Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-030-2653 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-6-5 | Arconic Global Fasteners & Rings, |
HT4041-3-6-5 | Hi-shear Corporation |
HT4041-3-6-5 | Sps Technologies, Llc |
HT4041-3-6-5 | Huck International, Inc. |
3M707-3-6-5 | Fastener Innovation Technology, Inc. |
WC4041-3-6-5 | West Coast Aerospace Inc |
HT4041-3-6-5 | Lisi Aerospace Canada Corp |
HT4041-3-6-5 | Alcoa Global Fasteners, Inc. |
11873-3-6-5 | Reid Products Inc. |
3M707-3-6-5 | Boeing Company, The |
HT4041-3-6-5 | Huck Intl Inc |
10114874 | Nimikkeistokeskus Ncb Finland |
3M707-3-6-5 | Valley-todeco, Inc. |
HT4041-3-6-5 | Sps Technologies, Llc |
3M707-3-6-5 | Heartland Precision Fasteners, Inc. |
3M707-3-6-5 | Houston Precision Fasteners I, Lp |
HT4041-3-6-5 | Sps Technologies, Llc |
HT4041-3-6-5 | Sps Technologies, Llc |
HT4041-3-6-5 | Sps Technologies Ltd Tj Brooks |