NSN 5305-01-033-1618
High Torque Screw
Thd major dia reduced to 0.497 inmax dia.
Manufacturer part number 204-13555-2 for national stock number 5305010331618.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-033-1618.
-
MPN or Model
204-13555-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.775 inches -
Fastener Length
3.340 inches -
Head Style
Flat countersunk -
Head Diameter
0.688 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
2.565 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Ph13-8mo bms7-189 fscm 76301 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-010-1479 MPN 107S2434-8Door H Pin Assembly
- 1680-00-024-3891 MPN 6-52857Hoist Drum Assembly
- 5930-00-104-1493 MPN 269-2635-040Rotary Switch Section
- 5905-00-104-8348 MPN BACR14CJ332Composition Fixed Resistor
- 5935-00-162-9492 MPN BACC62W16G05PElectrical Plug Connector
- 1560-00-334-5950 MPN 9-65112-4Aircraft Structural Panel
- 1560-00-600-2625 MPN 9-67111Escape Hatch Mechanism Yoke
- 1560-00-606-2864 MPN 9-63273-22Light Shield
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-033-1618 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
204-13555-2 | The Boeing Company |