NSN 5305-01-034-6626
High Torque Screw
Between 1.376 inches and 1.406 inches fastener length, flat countersunk head style, between 0.612 inches and 0.672 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number HT4048-7D-15 for national stock number 5305010346626.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-034-6626.
-
MPN or Model
HT4048-7D-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 1.376 inches and 1.406 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.612 inches and 0.672 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.120 inches first hole and 0.130 inches first hole -
Material
Steel -
Material Specification
23-112, mcdonnel douglas corporation mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-046-2081 MPN HT4010-6-8Shoulder Screw
- 5305-01-104-1468 MPN HT4067-3-5DClose Tolerance Screw
- 5305-01-133-1572 MPN HT4027-4-4Close Tolerance Screw
- 5305-01-141-7198 MPN HT4020-5-16AYShoulder Screw
- 5305-01-146-3594 MPN HT4025L5-13Close Tolerance Screw
- 5305-01-185-7160 MPN BACB30LU4-26Close Tolerance Screw
- 5305-01-222-9083 MPN SC1779-4-24Close Tolerance Screw
- 5305-01-458-2165 MPN SC1752-4-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-034-6626 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4048-7D-15 | Arconic Global Fasteners & Rings, |
AT4048-7D-15 | Huck International, Inc. |
HT4048-7D-15 | Houston Precision Fasteners I, Lp |
HT4048-7D-15 | Hi-shear Corporation |
HT4048-7D-15 | Sps Technologies, Llc |
HT4048-7D-15 | Lisi Aerospace Canada Corp |
HT4048-7D-15 | Alcoa Global Fasteners, Inc. |
HT4048-7D-15 | Sps Technologies, Llc |
11929-7D15 | Reid Products Inc. |
ST3M713-7D15 | Boeing Company, The |
AT4048-7D-15 | Huck Intl Inc |
Stock Check
- NS: 7