NSN 5305-01-035-9549
High Torque Screw
Between 1.360 inches and 1.390 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4048-5D-16 for national stock number 5305010359549.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-035-9549.
-
MPN or Model
HT4048-5D-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.360 inches and 1.390 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
End Application
Aircraft, eagle f-15 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.113 inches first hole and 0.123 inches first hole -
Material
Steel -
Material Specification
23-112, mcdonnel douglas corporation mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-5919 MPN 51B222-40HClose Tolerance Screw
- 5305-00-508-3069 MPN LS15265V4-10Close Tolerance Screw
- 5305-00-510-5285 MPN 15263V3-10Machine Screw
- 5305-00-779-0280 MPN 51B333-13Close Tolerance Screw
- 5305-00-802-1443 MPN 51B222-9HMachine Screw
- 5305-01-022-3053 MPN LS15236-04-6Machine Screw
- 5305-01-050-4993 MPN HT4028L7-11MClose Tolerance Screw
- 5305-01-132-2158 MPN SC2671-3-49Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-035-9549 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4048-5D-16 | Hi-shear Corporation |
HT4048-5D-16 | Sps Technologies, Llc |
ST3M713-5D16 | Fastener Innovation Technology, Inc. |
WC4048-5D16 | West Coast Aerospace Inc |
HT4048-5D-16 | Lisi Aerospace Canada Corp |
HT4048-5D-16 | Alcoa Global Fasteners, Inc. |
HT4048-5D-16 | Sps Technologies, Llc |
ST3M713-5D16 | Arconic Global Fasteners & Rings, |
HT4048-5D-16 | Huck International, Inc. |
ST3M713-5D16 | Sps Technologies, Llc |
ST3M713-5D16 | Sps Technologies Ltd Tj Brooks |
ST3M713-5D16 | Boeing Company, The |
HT4048-5D-16 | Huck Intl Inc |
HT0408-5D16 | Hi-shear Corporation |