NSN 5305-01-037-4653
Tap Bolt
Between 2.500 inches and 2.594 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS51096-366 for national stock number 5305010374653.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-037-4653.
-
MPN or Model
MS51096-366
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.938 inches -
Fastener Length
Between 2.500 inches and 2.594 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.375 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
10500 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Qq-f-85, grade 5 federal specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-009-6596 MPN MS24285RA2Electrical Receptacle Connector
- 5940-00-115-2686 MPN MS20659-136Lug Terminal
- 5950-00-126-6935 MPN MS90537-72Radio Frequency Coil
- 5935-00-127-1453 MPN MS3111P8-4SElectrical Plug Connector
- 5930-00-137-8573 MPN MS25089-1H-1Push-pull Switch
- 5935-00-140-0065 MPN MS27473T22A55PAElectrical Plug Connector
- 5930-00-167-0604 MPN MS3786-4-0038Rotary Switch
- 5935-00-201-6619 MPN MS3106E28-12SYElectrical Plug Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-037-4653 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51096-366 | Military Standards |