NSN 5305-01-038-1300
High Torque Screw
0.526 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number NAS1131-4 for national stock number 5305010381300.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-038-1300.
-
MPN or Model
NAS1131-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.526 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1131 professional/industrial association standard
More from these suppliers
- 5305-00-059-9564 MPN NAS1221-4-12Machine Screw
- 5305-00-064-3478 MPN NAS1204-24Close Tolerance Screw
- 5305-01-069-8910 MPN NAS1203-64Close Tolerance Screw
- 5305-00-435-9101 MPN NAS1189-3P20LSocket Head Cap Screw
- 5305-00-754-0989 MPN NAS1209-10WClose Tolerance Screw
- 5305-01-069-0507 MPN NAS1189-08T7LSocket Head Cap Screw
- 1680-01-562-2594 MPN VL12AP5-7Materi Aircraft Pin
- 5305-00-005-5919 MPN 51B222-40HClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-038-1300 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1131-4 | National Aerospace Standards |
NAS1131-4 | Huck International, Inc. |
NAS1131-4 | Nor-cal Supply Co.inc. |
NAS1131-4 | Hi-shear Corporation |
NAS1131-4 | Sps Technologies, Llc |
NAS1131-4 | Alcoa Global Fasteners, Inc. |
NAS1131-4 | Apcom Inc |
NAS1131-4 | Plastic And Metal Products |
NAS1131-4 | Sps Technologies, Llc |
NAS1131-4 | Fastener Innovation Technology, Inc. |
NAS1131-4 | Lawrence Engineering And Supply Inc |
NAS1131-4 | Huck Intl Inc |
NAS1131-4 | F And C Sales Inc |
NAS1131-4 | Air Industries Co Inc |