NSN 5305-01-040-4655
Bolt Stove
Between 1.190 inches and 1.250 inches fastener length, hexagon head style, between 0.049 inches and 0.060 inches head height, width between flats: between 0.181 inches and 0.187 inches .
Manufacturer part number BACS12CB04-20 for national stock number 5305010404655.
Datasheet
-
Product description
Machine Screw NSN 5305-01-040-4655.
-
MPN or Model
BACS12CB04-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.140 inches and 1.250 inches -
Fastener Length
Between 1.190 inches and 1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.049 inches and 0.060 inches -
Width Between Flats
Between 0.181 inches and 0.187 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Screw Material
Steel -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-761-7983 MPN 107E4570-24Heat And Vent Duct
- 4920-00-964-1301 MPN 114G1155-1Cyl Holding Fixture
- 5905-01-081-2011 MPN 114ES242-2Precision Nonwire Wound Variable Resistor
- 4920-01-310-6633 MPN 145G0069-1Aircraft Maintenance Fixture
- 1560-01-373-7811 MPN 114S2904-33Aircraft Fairing
- 1680-01-374-3760 MPN 114S5303-31Aircraft Seat Frame Section
- 1560-01-380-3400 MPN 114S2352-32Aircraft Structural Component Support
- 1560-01-384-6083 MPN 114S5522-49Aircraft Skin
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-040-4655 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACS12CB04-20 | The Boeing Company |