NSN 5305-01-040-5587
Panel Screw
Between 0.282 inches and 0.287 inches fastener length, flat countersunk undercut head style, between 0.191 inches and 0.225 inches head diameter, head height: between 0.033 inches and 0.037 inches .
Manufacturer part number 6866722-1 for national stock number 5305010405587.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-040-5587.
-
MPN or Model
6866722-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.156 inches -
Fastener Length
Between 0.282 inches and 0.287 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.191 inches and 0.225 inches -
Head Height
Between 0.033 inches and 0.037 inches -
First Diameter From Head
Between 0.079 inches and 0.084 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.282 inches and 0.287 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-168-3401 MPN 6094606-1Conductor Splice
- 5930-00-804-3471 MPN 6043945Push Switch
- 5985-00-859-9361 MPN 6621400Fixed Attenuator
- 5905-01-077-2544 MPN 6097082-8Film Fixed Resistor
- 5935-01-100-5808 MPN 6133500-7Electrical Receptacle Connector
- 5935-01-441-8162 MPN 123A674Electrical Receptacle Connector
- 4920-01-551-0560 MPN 195A831Aircraft Maintenance Fixture
- 5935-01-437-5933 MPN 185A616-1Electrical Plug Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
![Mechanic Bill explains Panel Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-040-5587 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6866722-1 | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)