NSN 5305-01-043-0014
High Torque Screw
Between 1.484 inches and 1.531 inches fastener length, flat countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HT239PB-5-18 for national stock number 5305010430014.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-0014.
-
MPN or Model
HT239PB-5-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.416 inches -
Fastener Length
Between 1.484 inches and 1.531 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
30.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510l professional/industrial association standard
More from these suppliers
- 5305-01-129-6941 MPN HT4054-5-12AClose Tolerance Screw
- 5305-01-146-3594 MPN HT4025L5-13Close Tolerance Screw
- 5305-01-147-6737 MPN ST3M733-6L11Close Tolerance Screw
- 5305-01-202-0108 MPN BACB30LU2P3Close Tolerance Screw
- 5305-01-207-9351 MPN BACB30LK3U5Close Tolerance Screw
- 5305-01-261-1896 MPN 51B334-9YClose Tolerance Screw
- 5305-01-312-5006 MPN SCI785T-04-04Machine Screw
- 5305-01-337-4892 MPN HT4075VS5-12-51Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-0014 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB-5-18 | Hi-shear Corporation |
106750-5-18 | Sps Technologies, Llc |
HT8043-5-18 | Arconic Global Fasteners & Rings, |
A147-5-18 | Huck International, Inc. |
BM19025-5-18 | Huck International, Inc. |
HT239PB-5-18 | Lisi Aerospace Canada Corp |
GB510L5-18 | Northrop Grumman Systems Corporation |
A147-5-18 | Huck Intl Inc |
BM19025-5-18 | Huck Intl Inc |
HT8043-5-18 | Alcoa Global Fasteners, Inc. |
HT239PB-5-18 | Hi-shear Corporation |
106750-5-18 | Sps Technologies, Llc |
GB510L5-18 | Northrop Grumman Systems Corporation |
HT8043-5-18 | Alcoa Global Fasteners, Inc. |
A147-5-18 | Huck Intl Inc |
BM19025-5-18 | Huck Intl Inc |