NSN 5305-01-043-3429
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B450 for national stock number 5305010433429.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-3429.
-
MPN or Model
MS3369B450
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 3.543 inches and 3.563 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
End Application
Spec item -
Thread Diameter
0.250 inches -
Grip Length
Between 3.125 inches and 3.141 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.448 inches first hole and 3.468 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-01-124-0646 MPN CA27070Missile Ejector Fittin Bolt Assy
- 5306-01-163-9568 MPN AS230-3Machine Bolt
- 5935-00-006-1265 MPN MS3470L14-5SXElectrical Receptacle Connector
- 5905-00-068-3643 MPN MS35834-414Film Fixed Resistor
- 5935-00-074-4729 MPN MS24036-1Electrical Plug Connector
- 5935-00-127-1446 MPN MS16108/10-20Tip Jack
- 5940-00-143-4793 MPN MS25036-10Lug Terminal
- 5935-00-159-0173 MPN MS27353A20Electrical Connector Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-3429 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B450 | Military Standards |
AS169-4-50 | Avibank Mfg., Inc. |
MS3369-450 | Military Standards |
CA2658-4-50 | Arconic Global Fasteners & Rings, |
MS3369B450 | Military Standards |