NSN 5305-01-043-4301
High Torque Screw
Between 0.984 inches and 1.031 inches fastener length, flat countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number A147-5-10 for national stock number 5305010434301.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-4301.
-
MPN or Model
A147-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.416 inches -
Fastener Length
Between 0.984 inches and 1.031 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510l manufacturers standard
More from these suppliers
- 5305-00-170-2940 MPN HT8138-3-5Close Tolerance Screw
- 5305-00-492-6841 MPN SC2000B1032-20Machine Screw
- 5305-00-989-3194 MPN 53B333-9Machine Screw
- 5305-01-121-5498 MPN HT4067-4-11AClose Tolerance Screw
- 5305-01-130-6555 MPN SC2671-3-10Machine Screw
- 5305-01-131-7559 MPN HT4049-6-13Close Tolerance Screw
- 5305-01-131-9476 MPN ST3M455-6L5Close Tolerance Screw
- 5305-01-142-9920 MPN HT4020-4-12AYShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-4301 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A147-5-10 | Huck International, Inc. |
BM19025-5-10 | Huck International, Inc. |
HT8043-5-10 | Arconic Global Fasteners & Rings, |
HT239PB-5-10 | Hi-shear Corporation |
106750-5-10 | Sps Technologies, Llc |
HT239PB-5-10 | Lisi Aerospace Canada Corp |
GB510L5-10 | Alcoa Global Fasteners, Inc. |
GB510L5-10 | Huck Intl Inc |
GB510L5-10 | Northrop Grumman Systems Corporation |
A147-5-10 | Huck Intl Inc |
BM19025-5-10 | Huck Intl Inc |
BM19025-5-10 | Precision Fastening Sub Omark |
HT8043-5-10 | Alcoa Global Fasteners, Inc. |
GB510L5-10 | Huck International, Inc. |
HT239PB-5-10 | Hi-shear Corporation |
106750-5-10 | Sps Technologies, Llc |
GB510L5-10 | Northrop Grumman Systems Corporation |
HT8043-5-10 | Alcoa Global Fasteners, Inc. |
A147-5-10 | Huck Intl Inc |
BM19025-5-10 | Huck Intl Inc |