NSN 5305-01-043-7718
High Torque Screw
Between 1.265 inches and 1.312 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334C12 for national stock number 5305010437718.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-7718.
-
MPN or Model
NAS334C12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.265 inches and 1.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Single Shear Strength
4650 pounds per square inch -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.124 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas334 professional/industrial association standard
More from these suppliers
- 5930-01-622-7018 MPN MS24655-135Toggle Switch
- 5305-00-052-2230 MPN MS24671-77Socket Head Cap Screw
- 5305-00-058-9391 MPN MS51977-76Setscrew
- 5305-00-079-9618 MPN NAS1351-4LN8PSocket Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-142-3595 MPN NAS600-26PMachine Screw
- 5305-00-151-5783 MPN MS16995-101Socket Head Cap Screw
- 5305-00-182-9507 MPN NAS333CP22Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-7718 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334C12 | National Aerospace Standards |