NSN 5305-01-043-8868
High Torque Screw
Between 0.885 inches and 0.932 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT8043-3-10 for national stock number 5305010438868.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-8868.
-
MPN or Model
HT8043-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 0.885 inches and 0.932 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
End Application
Aircraft, phantom f-4; aircraft, eagle f-15; aircraft, f-16 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510l professional/industrial association standard
More from these suppliers
- 4920-01-625-7243 MPN 99-1721DGAircraft Maintenance Fixture
- 5305-00-283-4584 MPN HT8137-3-11ASClose Tolerance Screw
- 5305-00-486-2290 MPN C082-4-21Close Tolerance Screw
- 5305-00-935-7580 MPN H804-632-16Machine Screw
- 5305-01-047-9441 MPN BACB30LU4-7Close Tolerance Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-085-3231 MPN HT4009-4-2Shoulder Screw
- 5305-01-126-4719 MPN HT4049-4-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-8868 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8043-3-10 | Arconic Global Fasteners & Rings, |
A147-3-10 | Huck International, Inc. |
HT239PB-3-10 | Hi-shear Corporation |
106750-3-10 | Sps Technologies, Llc |
HT239PB-3-10 | Lisi Aerospace Canada Corp |
GB510L3-10 | Northrop Grumman Systems Corporation |
A147-3-10 | Huck Intl Inc |
HT8043-3-10 | Alcoa Global Fasteners, Inc. |