NSN 5305-01-044-7265
High Torque Screw
0.693 inches fastener length, flat countersunk head style, 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NB1114-1032-4 for national stock number 5305010447265.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-044-7265.
-
MPN or Model
NB1114-1032-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.505 inches -
Fastener Length
0.693 inches -
Head Style
Flat countersunk -
Head Diameter
0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-008-5755 MPN A51P91517-11Vent Tube Support Link
- 5985-00-009-7635 MPN A51A9005-5Antenna
- 5935-00-063-7677 MPN GC810A5FElectrical Plug Connector
- 1560-00-066-3004 MPN 123WM10059-511Back Up Fitting
- 5930-00-068-9027 MPN 128SCP137-19Pressure Switch
- 1560-00-075-8217 MPN 128CM12039-5Crank Assembly
- 1680-00-094-2932 MPN 89PM1771-1Clip And Insert
- 1560-00-123-8581 MPN 128WM10238-7Wing Panel Fence
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-044-7265 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NB1114-1032-4 | Hi-shear Corporation |
GC530F1032-4 | Northrop Grumman Systems Corporation |
NB1114-1032-4 | Hi-shear Corporation |
GC530F1032-4 | Northrop Grumman Systems Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)