NSN 5305-01-044-8534
High Torque Screw
Between 0.830 inches and 0.860 inches fastener length, flat countersunk head style, between 0.295 inches and 0.334 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number BACB30LU2-8 for national stock number 5305010448534.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-044-8534.
-
MPN or Model
BACB30LU2-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.830 inches and 0.860 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.295 inches and 0.334 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1680-01-621-9114 MPN BACB30LM3D15Bolt C769 Nrp
- 5305-01-188-9630 MPN BACB30LU8-20YShoulder Screw
- 5306-00-438-8681 MPN MS21250-10048Shear Bolt
- 5306-00-915-2067 MPN VFK100G-07026Shear Bolt
- 5306-01-013-3997 MPN VAL23029-4-22Close Tolerance Bolt
- 5306-01-142-7178 MPN VAL23607-4-31Shoulder Bolt
- 5306-01-231-5896 MPN BACB30MT8T-21YShoulder Bolt
- 5306-01-286-3506 MPN VAL23033-12H28Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-044-8534 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU2-8 | Huck International, Inc. |
BACB30LU2-8 | Valley-todeco, Inc. |
BACB30LU2-8 | Federal Manufacturing Corporation |
BACB30LU2-8 | Sps Technologies, Llc |
BACB30LU2-8 | Arconic Global Fasteners & Rings, |
BACB30LU2-8 | Sps Technologies, Llc |
BACB30LU2-8 | Sonic Industries Inc. |
BACB30LU2-8 | H Kramer & Co. |
BACB30LU2-8 | Alcoa Global Fasteners, Inc. |
BACB30LU2-8 | The Boeing Company |
BACB30LU2-8 | Huck Intl Inc |
BACB30LU2-8 | Sps Technologies, Llc |