NSN 5305-01-045-2467
High Torque Screw
Between 3.735 inches and 3.782 inches fastener length, round head style, between 0.568 inches and 0.593 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number 51B223-54 for national stock number 5305010452467.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-045-2467.
-
MPN or Model
51B223-54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.422 inches -
Fastener Length
Between 3.735 inches and 3.782 inches -
Head Style
Round -
Head Diameter
Between 0.568 inches and 0.593 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 3.360 inches and 3.390 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 8740 or steel comp e4340 or steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
86823-51b223 professional/industrial association standard
More from these suppliers
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-456-2431 MPN AIC813-5-R23Machine Screw
- 5305-00-807-3928 MPN AIC4043-04-05Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-144-0437 MPN NAS1101-02-8Machine Screw
- 5305-01-271-1798 MPN LD111-0044-2514Close Tolerance Screw
- 5305-01-356-3154 MPN AIC1238-3-2Machine Screw
- 5305-01-462-2833 MPN TX1026V4-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-045-2467 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B223-54 | Northrop Grumman Technical Services, |
51B223-54 | Northrop Grumman Systems Corporation |
51B223-64 | Arconic Global Fasteners & Rings, |
51B223-64 | Sps Technologies, Llc |
51B223-64 | Sps Technologies, Llc |
51B223-64 | Hi-shear Corporation |
51B223-64 | Sps Technologies, Llc |
51B223-64 | Alcoa Global Fasteners, Inc. |
51B223-54 | Sps Technologies, Llc |
51B223-54 | Arconic Global Fasteners & Rings, |
51B223-54 | Sps Technologies, Llc |
51B223-54 | Hi-shear Corporation |
51B223-54 | Sps Technologies, Llc |
51B223-54 | Alcoa Global Fasteners, Inc. |
51B223-54 | Northrop Grumman Systems Corporation |