NSN 5305-01-047-0375
High Torque Screw
Between 3.981 inches and 4.001 inches fastener length, flat chamfer head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.126 inches and 0.141 inches .
Manufacturer part number MS2115-0457 for national stock number 5305010470375.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-047-0375.
-
MPN or Model
MS2115-0457
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.403 inches and 0.439 inches -
Fastener Length
Between 3.981 inches and 4.001 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
End Application
Spec item -
Thread Diameter
0.250 inches -
Grip Length
Between 3.562 inches and 3.578 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.885 inches first hole and 3.905 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-004-5811 MPN MS27467E25B35PElectrical Plug Connector
- 5935-00-062-1213 MPN MS3110E14-19PElectrical Receptacle Connector
- 5935-00-079-3990 MPN MS3183E19Electrical Connector Cover
- 5905-00-141-1187 MPN RCR20G203JRComposition Fixed Resistor
- 5935-00-201-7271 MPN MS3101E22-14SElectrical Plug Connector
- 5935-00-208-4263 MPN MS3126P18-32SXElectrical Plug Connector
- 5940-00-231-1601 MPN MS20659-6Lug Terminal
- 5935-00-259-0063 MPN MS3456W20-5PElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-047-0375 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS2115-0457 | Military Standards |
MS2115-0457 | Military Standards |