NSN 5305-01-047-0381
High Torque Screw
Between 1.391 inches and 1.421 inches fastener length, flat countersunk head style, between 1.071 inches and 1.141 inches head diameter, grip diameter: between 0.5605 inches and 0.5615 inches .
Manufacturer part number NAS589-8 for national stock number 5305010470381.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-047-0381.
-
MPN or Model
NAS589-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.881 inches and 0.931 inches -
Fastener Length
Between 1.391 inches and 1.421 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.071 inches and 1.141 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.562 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas589 professional/industrial association standard
More from these suppliers
- 5940-01-100-9605 MPN NAS1746-9Conductor Splice
- 1680-01-544-9075 MPN NAS1375A16SA283Mater Aircraft Hose
- 5305-00-056-7984 MPN AN565D1032H9Setscrew
- 5305-00-059-8256 MPN MS35214-31Machine Screw
- 5305-00-082-1653 MPN NAS1352-202Socket Head Cap Screw
- 5305-00-116-0028 MPN NAS603-27PMachine Screw
- 5305-00-167-3893 MPN MILS7839Machine Screw
- 5305-00-225-9092 MPN MS90726-37Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-047-0381 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS589-8 | National Aerospace Standards |
Stock Check
- NS: 51
- NE: 122