NSN 5305-01-047-1239
Panel Screw
Between 0.860 inches and 0.900 inches fastener length, flat chamfer head style, between 0.214 inches and 0.216 inches head diameter, head height: 0.120 inches .
Manufacturer part number 119525 for national stock number 5305010471239.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-047-1239.
-
MPN or Model
119525
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
Between 0.860 inches and 0.900 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.214 inches and 0.216 inches -
Head Height
0.120 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
71200 pounds per square inch -
Hardness Rating
95.0 rockwell c -
Minimum Yield Strength
66700 pounds per square inch -
Material
Steel comp 303 -
Material Specification
Mil-s-7720 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-009-0393 MPN 975203-1Valve Seat
- 4920-00-516-6975 MPN 291202-1Aircraft Engine Maintenance Fixture
- 5950-00-721-2287 MPN 1048286Audio Frequency Transformer
- 5905-01-058-7606 MPN 3184648-10201Film Fixed Resistor
- 5930-01-124-0407 MPN 104-516-9002Actuator Switch
- 4920-01-141-2962 MPN 290742-11Test Brake Disc Wheel
- 4820-01-159-5874 MPN 3329504Poppet And Seat Assembly
- 5945-01-183-2099 MPN 1013360-6Electrical Solenoid
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-047-1239 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
119525 | Honeywell International Inc. |
119525 | Honeywell International Inc. |