NSN 5305-01-047-6247
High Torque Screw
Retaining element in shank.
Manufacturer part number AS169-4-47 for national stock number 5305010476247.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-047-6247.
-
MPN or Model
AS169-4-47
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 3.356 inches and 3.376 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 2.938 inches and 2.954 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.261 inches first hole and 3.281 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-092-5898 MPN 123CS10016-501Rudder Trim Tab
- 1560-00-107-9006 MPN 123C12213-501Bungee Assembly
- 5985-00-118-2913 MPN GW810BV1Waveguide Assembly
- 1680-00-229-5491 MPN 123C11229-501Fli Sector Assembly
- 1560-00-305-3606 MPN 96PM1198-1Power Plant F Cover
- 5935-00-405-1264 MPN GC805CND85BNElectrical Receptacle Connector Body
- 1560-00-470-7970 MPN A51E10043-3Forward And Aft Shaft Assembly
- 5905-00-492-7601 MPN GR815E1542F3Inductive Wire Wound Fixed Resistor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-047-6247 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS169-4-47 | Avibank Mfg., Inc. |
MS3369B447 | National Aerospace Standards |
MS3369B447 | Military Standards |
CA2658-4-47 | Arconic Global Fasteners & Rings, |
CA2630-0447 | Arconic Global Fasteners & Rings, |
GB511AE4-47 | Northrop Grumman Systems Corporation |
AS108-04-47 | Avibank Mfg., Inc. |
VP1119-4-47 | Vining Industries Inc |