NSN 5305-01-047-8486
High Torque Screw
Between 0.829 inches and 0.859 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2481 inches and 0.2487 inches .
Manufacturer part number 3MA584-6 for national stock number 5305010478486.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-047-8486.
-
MPN or Model
3MA584-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.829 inches and 0.859 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-005-9110 MPN 53G970602-8Bell Crank
- 1560-00-181-5536 MPN 32-46016-7Uplock Crank Shaft
- 1560-00-219-4661 MPN 68A321040-1001Aircraft Access Door
- 1560-00-256-9541 MPN 32-33253-89Airframe Zee
- 1560-00-280-6474 MPN 68A350718-2028Canopy Fairing Assembly
- 5940-00-401-3650 MPN 5M1045-13Conductor Splice
- 5975-00-419-9812 MPN 75D631000-2183Electrical Components Tiedown Strap
- 1560-00-447-0135 MPN 53-80012-35Cockpit Map And Data Case
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-047-8486 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA584-6 | Boeing Company, The |
3MFRA584-6 | Boeing Company, The |