NSN 5305-01-048-1141
High Torque Screw
Between 2.199 inches and 2.246 inches fastener length, pan head style, between 0.361 inches and 0.381 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number 51B221-31 for national stock number 5305010481141.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-048-1141.
-
MPN or Model
51B221-31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.246 inches and 0.323 inches -
Fastener Length
Between 2.199 inches and 2.246 inches -
Head Style
Pan -
Head Diameter
Between 0.361 inches and 0.381 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1185 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.923 inches and 1.953 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate or cadmium -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification 1st treatment response or nas 672 assn standard 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-458-4705 MPN 2-13318-5Canopy Cock Support
- 1560-00-551-7836 MPN 14-16711-1Aft Outboard Speed Brake Bracket
- 1560-00-710-2309 MPN 2-13903-3Inflatable Canopy Seal
- 1560-00-759-6667 MPN 10C125C17605Cont Wire Rope Assy
- 1680-00-826-7488 MPN 6-50850-1Aircraft Safety Lap Belt Initiator Lever Actuator
- 1560-00-868-7424 MPN 2-26122-506Wing Flap Hinge
- 1560-01-005-4526 MPN 2-10839-16Nose Landing Gear Support
- 1560-01-037-0011 MPN 3-13312-9Aft Canopy Mechanism Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-048-1141 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B221-31 | Northrop Grumman Technical Services, |
51B221-31 | Northrop Grumman Systems Corporation |