NSN 5305-01-048-1144
High Torque Screw
Between 1.172 inches and 1.219 inches fastener length, pan head style, between 0.568 inches and 0.593 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number 51B223-13H for national stock number 5305010481144.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-048-1144.
-
MPN or Model
51B223-13H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.422 inches -
Fastener Length
Between 1.172 inches and 1.219 inches -
Head Style
Pan -
Head Diameter
Between 0.568 inches and 0.593 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.797 inches and 0.827 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.068 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate or cadmium -
Surface Treatment Specification
Q-p-416 ty2 cl2 federal specification 13th treatment response or nas 672 assn standard 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-070-5020 MPN 4-10351-9Aircraft Access Door
- 5930-00-275-7036 MPN 14-74902-5Sensitive Switch
- 1560-00-284-2518 MPN 3-73204-3Horizontal Tail Feel Spring Stop
- 1560-00-465-7101 MPN 8-10695-2Upper Segment Pin Guide
- 1560-00-483-4187 MPN 2-13821-501Canopy Handle Support
- 1560-00-785-8702 MPN 3-40459-1Strut Door Crank
- 1560-00-785-8715 MPN 2-12347-15Aircraft Access Cover
- 4920-00-973-3508 MPN 3-76703-1Interface Device Adapter Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-048-1144 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B223-13H | Northrop Grumman Technical Services, |
51B223-13H | Northrop Grumman Systems Corporation |