NSN 5305-01-049-4055
High Torque Screw
Between 1.830 inches and 1.860 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number BACB30LH3U24 for national stock number 5305010494055.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-049-4055.
-
MPN or Model
BACB30LH3U24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.350 inches -
Fastener Length
Between 1.830 inches and 1.860 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
81205-bacs12lh professional/industrial association standard
More from these suppliers
- 5305-01-195-5061 MPN ST3M714-4D35Close Tolerance Screw
- 5305-01-396-9651 MPN GB511GK4-8Close Tolerance Screw
- 5305-01-417-2492 MPN 3M1169V3-6AClose Tolerance Screw
- 5306-00-479-5178 MPN STSBG002A07U024Shear Bolt
- 5306-00-612-2929 MPN 6-50417-2Internal Wrenching Bolt
- 5306-01-021-6837 MPN VAL23033-5H8Shear Bolt
- 5306-01-052-4442 MPN VAL22034-18F134Shear Bolt
- 5306-01-054-3425 MPN C7521L7-11Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-049-4055 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3U24 | Valley-todeco, Inc. |
BACB30LH3U24 | Sps Technologies, Llc |
BACB30LH3U24 | Federal Manufacturing Corporation |
BACB30LH3U24 | Sps Technologies, Llc |
BACB30LH3U24 | The Boeing Company |
BACB30LH3U24 | Arconic Global Fasteners & Rings, |
BACB30LH3U24 | Voi-shan/chatsworth |
BACB30LH3U24 | Huck Intl Inc |
BACB30LH3U24 | Huck International, Inc. |
BACB30LH3U24 | Sps Technologies, Llc |