NSN 5305-01-050-3823
Bolt Stove
Between 0.719 inches and 0.750 inches fastener length, flat countersunk head style, between 0.238 inches and 0.279 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 330-4058-070 for national stock number 5305010503823.
Datasheet
-
Product description
Machine Screw NSN 5305-01-050-3823.
-
MPN or Model
330-4058-070
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.597 inches and 0.690 inches -
Fastener Length
Between 0.719 inches and 0.750 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.238 inches and 0.279 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 -
Screw Surface Treatment
Oxide -
Screw Surface Treatment Specification
Mil-c-13924 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-080-9872 MPN 304-0011-00Lug Terminal
- 5905-00-081-7350 MPN 747-5435-000Inductive Wire Wound Fixed Resistor
- 5940-00-089-2784 MPN 553-7217-003Lug Terminal
- 5950-00-089-2838 MPN 240-0211-000Radio Frequency Coil
- 5945-00-107-2672 MPN 410-0346-010Electromagnetic Relay
- 5940-00-129-6067 MPN 554-9421-003Terminal Board
- 5905-00-192-3933 MPN 705-7184-000Film Fixed Resistor
- 5935-00-201-4069 MPN 506-7274-002Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-050-3823 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
330-4058-070 | Rockwell Collins, Inc. |
P330-4058-070 | Allied Products Corp Pheoll Mfg Co |
330-4058-070 | Rockwell Collins, Inc. |