NSN 5305-01-050-9003
High Torque Screw
Between 1.298 inches and 1.328 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number VT1693F-5-14 for national stock number 5305010509003.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-050-9003.
-
MPN or Model
VT1693F-5-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 1.298 inches and 1.328 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-345-2365 MPN HT4024L3D4Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-207-0224 MPN BACB30NN3K7Close Tolerance Screw
- 5305-01-239-2407 MPN C9535-6-22Close Tolerance Screw
- 5305-01-386-2933 MPN AIC1700-5-9Close Tolerance Screw
- 5305-01-477-5750 MPN TX1026V5-7AClose Tolerance Screw
- 5305-01-541-5189 MPN 120-265E4P2Mate Aircraft Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-050-9003 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
H044-5-14 | Huck International, Inc. |
12557-5-A14P | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
PBF1165-5-14 | Sps Technologies, Llc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Interconnection Products Inc |
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
H044-5-14 | Huck International, Inc. |
12557-5-A14P | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
PBF1165-5-14 | Sps Technologies, Llc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Interconnection Products Inc |
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
H044-5-14 | Huck International, Inc. |
12557-5-A14P | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
PBF1165-5-14 | Sps Technologies, Llc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Interconnection Products Inc |
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
H044-5-14 | Huck International, Inc. |
12557-5-A14P | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
PBF1165-5-14 | Sps Technologies, Llc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Interconnection Products Inc |
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
H044-5-14 | Huck International, Inc. |
12557-5-A14P | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
PBF1165-5-14 | Sps Technologies, Llc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Interconnection Products Inc |
PBF1165-5-14 | Interconnection Products Inc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
12557-5-A14P | Sps Technologies, Llc |
H044-5-14 | Huck International, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Alcoa Global Fasteners, Inc. |
VT1693F-5-14 | Arconic Global Fasteners & Rings, |
H044-5-14 | Huck International, Inc. |
12557-5-A14P | Sps Technologies, Llc |
121557-5-A14P | Sps Technologies, Llc |
AIC984-5-14 | Sps Technologies, Llc |
PBF1165-5-14 | Sps Technologies, Llc |
C7984-5-14 | Lockheed Martin Corporation |
PBF1165-5-14 | Interconnection Products Inc |