NSN 5305-01-050-9652
High Torque Screw
Between 1.722 inches and 1.752 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number BACB30LR4U21 for national stock number 5305010509652.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-050-9652.
-
MPN or Model
BACB30LR4U21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.722 inches and 1.752 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-183-1488 MPN BACB30LU6-52Close Tolerance Screw
- 5305-01-309-7039 MPN 74A731255-2001Socket Head Cap Screw
- 5305-01-351-0805 MPN 03A161-3-15Close Tolerance Screw
- 5305-01-406-3080 MPN 3M925C3-4AClose Tolerance Screw
- 5305-01-497-0841 MPN 3M1170C3-12AClose Tolerance Screw
- 5305-01-512-8353 MPN 3M1170D3-6AFClose Tolerance Screw
- 5306-00-143-2286 MPN VFK100G-05020Shear Bolt
- 5306-01-044-2963 MPN VAL23607-4-4Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-050-9652 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LR4U21 | The Boeing Company |
BACB30LR4U21 | Sps Technologies, Llc |
BACB3OLR4U21 | Valley-todeco, Inc. |
BACB3OLR4U21 | Federal Manufacturing Corporation |
BACB3OLR4U21 | Sps Technologies, Llc |
BACB3OLR4U21 | Sps Technologies, Llc |
BACB3OLR4U21 | Voi-shan/chatsworth |
BACB30LR4U21 | The Boeing Company |
BACB30LR4U21 | Sps Technologies, Llc |
BACB3OLR4U21 | Valley-todeco, Inc. |
BACB3OLR4U21 | Federal Manufacturing Corporation |
BACB3OLR4U21 | Sps Technologies, Llc |
BACB3OLR4U21 | Sps Technologies, Llc |
BACB3OLR4U21 | Voi-shan/chatsworth |