NSN 5305-01-051-5506
High Torque Screw
Between 0.786 inches and 0.816 inches fastener length, flat countersunk head style, between 0.305 inches and 0.358 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number C7985-3D7 for national stock number 5305010515506.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-051-5506.
-
MPN or Model
C7985-3D7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.786 inches and 0.816 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.305 inches and 0.358 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-411-6917 MPN A1102S08-15Machine Screw
- 5305-00-492-8753 MPN NAS1101-08-8BMachine Screw
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-00-802-3090 MPN 51B223-12Machine Screw
- 5305-00-815-6117 MPN 51B333-12HClose Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-00-966-7965 MPN AIC811-8-19Socket Head Cap Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-051-5506 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-3D7 | Huck International, Inc. |
C7985-3D7 | Arconic Global Fasteners & Rings, |
C7985-3D7 | Sps Technologies, Llc |
C7985-3D7 | Lockheed Martin Corporation |
AIC985-3D7P | Sps Technologies, Llc |
PBF1166-3D7 | Sps Technologies, Llc |
12155-3-7P | Sps Technologies, Llc |
VT1694F3-7D | Alcoa Global Fasteners, Inc. |
C7985-3D7 | Sps Technologes Inc |