NSN 5305-01-051-9906
Tap Bolt
Between 1.188 inches and 1.250 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number B1821AH050C125N for national stock number 5305010519906.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-051-9906.
-
MPN or Model
B1821AH050C125N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.034 inches and 1.250 inches -
Fastener Length
Between 1.188 inches and 1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5305-01-322-2871 MPN AESF4K190750AS0A11Machine Screw
- 5305-01-341-8394 MPN B18.6-4-40UNC-2AX3/8LG-ST12.9Machine Screw
- 5305-01-377-5163 MPN B1831CH060055NSocket Head Cap Screw
- 5305-01-384-4235 MPN B18.3 10-24X0.250CRESSHCSSocket Head Cap Screw
- 5305-01-407-7709 MPN B1821AH050F350NHexagon Head Cap Screw
- 5305-01-421-2042 MPN 0.31218UNC2A0.875T1G400SAAHexagon Head Cap Screw
- 5305-01-421-4213 MPN B1821AH038C375NHexagon Head Cap Screw
- 5305-01-461-8147 MPN ANSIB18.6.4#8X1.250Tapping Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-051-9906 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
B1821AH050C125N | American National Standards |
501153-12 | Dana Corp |