NSN 5305-01-052-0031
High Torque Screw
Between 1.828 inches and 1.875 inches fastener length, flat countersunk head style, between 0.283 inches and 0.332 inches head diameter, grip diameter: between 0.1610 inches and 0.1640 inches .
Manufacturer part number MS24694C26 for national stock number 5305010520031.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-052-0031.
-
MPN or Model
MS24694C26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.406 inches and 0.484 inches -
Fastener Length
Between 1.828 inches and 1.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.283 inches and 0.332 inches -
Grip Diameter
Between 0.1610 inches and 0.1640 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 1.391 inches and 1.422 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
85000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 302 or steel comp 303 or steel comp 304 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-01-447-1147 MPN 2805821P01Electrical Receptacle Connector
- 5940-01-451-4892 MPN NAS1063A20-500AZTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5940-01-630-1917 MPN NAS14941Lug Terminal
- 5305-00-009-9207 MPN NAS1096-3-23Hexagon Head Cap Screw
- 5305-00-059-3660 MPN NASM51958Machine Screw
- 5305-00-159-5567 MPN NAS1191E3P10Socket Head Cap Screw
- 5305-00-271-7700 MPN NAS229-43Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-052-0031 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694C26 | National Aerospace Standards |
MS24694C26 | Military Standards |