NSN 5305-01-054-4625
High Torque Screw
Between 0.853 inches and 0.873 inches fastener length, crowned hexagon head style, between 0.157 inches and 0.172 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS3369B506 for national stock number 5305010544625.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-4625.
-
MPN or Model
MS3369B506
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.307 inches and 0.357 inches -
Fastener Length
Between 0.853 inches and 0.873 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 0.375 inches and 0.390 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.740 inches first hole and 0.760 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-012-8930 MPN CA2658-4-19Close Tolerance Screw
- 5305-01-398-6543 MPN CA21063-06-4-10Machine Screw
- 5306-01-585-0448 MPN 20-117-5-3Machine Bolt
- 5305-00-540-3103 MPN AS16-6-11Close Tolerance Screw
- 5305-01-094-6060 MPN AS205-04-97Close Tolerance Screw
- 5305-01-646-2010 MPN JSFB26-9-34Close Tolerance Screw
- 5306-01-010-2372 MPN AS194-3-16Close Tolerance Bolt
- 5306-01-182-5184 MPN AS194-12-61Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-4625 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B506 | Military Standards |
AS169-5-06 | Avibank Mfg., Inc. |
CA2658-5-06 | Arconic Global Fasteners & Rings, |
MS3369B506 | Military Standards |
AS169-5-06 | Avibank Mfg., Inc. |
CA2658-5-06 | Arconic Global Fasteners & Rings, |
MS3369B506 | Military Standards |
AS169-5-06 | Avibank Mfg., Inc. |
CA2658-5-06 | Arconic Global Fasteners & Rings, |
MS3369B506 | Military Standards |
AS169-5-06 | Avibank Mfg., Inc. |
CA2658-5-06 | Arconic Global Fasteners & Rings, |