NSN 5305-01-054-5422
High Torque Screw
Between 1.388 inches and 1.418 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number C7985-4-16 for national stock number 5305010545422.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-5422.
-
MPN or Model
C7985-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.388 inches and 1.418 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-807-0394 MPN NAS1102-08-7Machine Screw
- 5305-01-054-5422 MPN AIC985-4-16PClose Tolerance Screw
- 5305-01-110-7905 MPN HT4067-5-9AClose Tolerance Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-218-5774 MPN AIC4043-06-12Machine Screw
- 5305-01-263-6160 MPN AIC985B3-5Close Tolerance Screw
- 5305-01-462-2743 MPN TX1004V3-4Machine Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-054-5422 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-4-16 | Lockheed Martin Corporation |
121558-4-A16P | Sps Technologies, Llc |
VT1694F4-16 | Alcoa Global Fasteners, Inc. |
PBF1166-4-16 | Sps Technologies, Llc |
AIC985-4-16 | Sps Technologies, Llc |
AIC985-4-16P | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)