NSN 5305-01-054-6235
High Torque Screw
Conical bearing surface of head 99.0 degree to 101.0 degree included angel 0.065 in. Long.
Manufacturer part number 121754-6-17 for national stock number 5305010546235.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6235.
-
MPN or Model
121754-6-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
1.632 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.515 inches and 0.535 inches -
Head Height
Between 0.096 inches and 0.106 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-051-5506 MPN AIC985-3D7PClose Tolerance Screw
- 5305-01-054-4628 MPN BACB30LU2-2Close Tolerance Screw
- 5305-01-101-4835 MPN HT4068-4-16AClose Tolerance Screw
- 5305-01-158-5373 MPN AIC940-5-6Machine Screw
- 5305-01-209-9325 MPN AIC4038-04-06Machine Screw
- 5305-01-322-8717 MPN 720210-90Hexagon Head Cap Screw
- 5305-01-351-0805 MPN 03A161-3-15Close Tolerance Screw
- 5305-01-381-1483 MPN 1701-3-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6235 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-6-17 | Sps Technologies, Llc |
VT1696-6-17 | Alcoa Global Fasteners, Inc. |
AIC9535-6-17 | Sps Technologies, Llc |
VT1696-6-17 | Arconic Global Fasteners & Rings, |
PBF1198-6-17 | Sps Technologies, Llc |
121754-6-17 | Sps Technologies, Llc |
C9535-6-17 | Lockheed Martin Corporation |
C9535-6-17 | Arconic Global Fasteners & Rings, |
C9535-6-17 | Sps Technologies, Llc |
C9535-6-17 | Sps Technologies, Llc |