NSN 5305-01-054-6236
High Torque Screw
Conical bearing surface of head 99.0 degree to 101.0 degree included angle 0.065 in. Long.
Manufacturer part number 121754-6-19 for national stock number 5305010546236.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6236.
-
MPN or Model
121754-6-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
1.758 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.515 inches and 0.535 inches -
Head Height
Between 0.096 inches and 0.106 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.374 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3025 MPN LS15265V3-21Close Tolerance Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-006-3895 MPN AIC811-5-23Socket Head Cap Screw
- 5305-01-025-6408 MPN AIC812-02-7Machine Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-054-6274 MPN AIC618-5-16Close Tolerance Screw
- 5305-01-059-7419 MPN NAS1101-08-6BMachine Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6236 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-6-19 | Sps Technologies, Llc |
VT1696-6-19 | Alcoa Global Fasteners, Inc. |
PBF1198-6-19 | Sps Technologies, Llc |
VT1696-6-19 | Arconic Global Fasteners & Rings, |
121754-6-19 | Sps Technologies, Llc |
C9535-6-19 | Lockheed Martin Corporation |
AIC9535-6-19 | Sps Technologies, Llc |